Load defaults

(Slink-e 2.0 and above only)

Command Code:

Binary: [1 1 1 1 1 1 1 1] [0 0 0 0 1 1 1 1]


Causes the Slink-e to load all of the current user settings from EEPROM memory so that they are returned to thier default values, Be wary of the fact that the baud rate stored in EEPROM could be different than the current baud rate. In this case communications will be lost until the host detects the new baud rate. If successful, the Slink-e will send a defaults loaded response.